Trapezoidal metal roofing sheet
T 18 roofing
T 18 roofing is a trapezoidal metal roof sheet with 18 mm ribs, for light buildings: sheds, garages, carports, workshops and extensions. Effective width 1128 mm, 0.50 to 0.80 mm thick, cut to length from 0.5 m up to 9 m. The minimum pitch depends on rafter length and exposure and follows the applicable French standard DTU 40.35.
Technical data · T 18 roofing
| Use | roofing |
|---|---|
| Effective width | 1128 mm |
| Overall width | 1173 mm |
| Rib height | 18 mm |
| Thickness | 0.50 – 0.80 mm |
| Min. length | 0.5 m |
| Max. length | 0.50 mm : 9 m · 0.70 mm : 9 m |
Key figures
- Effective width of 1,128 mm: 9 columns of panels cover 10 m of eaves.
Try this panel in our tools:
Coatings
Face 1: decorative coat · face 2: primer. State the visible face (roof or façade) when ordering.
Accessories
screws, filler strips, ridge tiles, barge flashings and matching flashings, anti-condensation felt (applied before profiling), touch-up paint
Profile & dimensions
Click to enlarge
Need a price?
Give us areas, lengths and colour: we will prepare an offer for this product.
In the same family
View family
A production run to launch, a project to price, an annual supply plan?
Describe your needs: models, volumes, thicknesses, colours and lengths. Our team will reply with a priced offer.