Steel roofing and cladding for professionalsCustomer areaFlashing configuratorQuantity calculatorRoof visualiserContact+33 9 53 69 90 72
Request a quote

Custom flashing configurator

Free tool for professionals: start from a catalogue flashing or create your own, set every dimension and angle, add holes and notching, then download the PDF drawing with title block, 3D view, DXF and STEP files, or add your parts to your quote request.

100% free
Log in / Create an account
1. Choose the flashing
A · Choose an existing model to customiseStandard flashings from the MEPRODIS catalogue: pick one, then freely edit dimensions, angles, material, holes and notching. Catalogue dimensions, raised to the 12 mm minimum fold where needed.
B · Create my own flashingDraw the section with the mouse, or import a sketch, photo or PDF: the configurator analyses it and redraws the part.
Accepted formats: JPG, PNG, WEBP, GIF, BMP and PDF (first page). A clean sketch with readable dimensions gives the best result.
2. Material
Painted face (RAL side)
3. Dimensions, angles and length
1
Angle 1 (°)flattened hem
2
Angle 2 (°)
3
Angle 3 (°)
4
Angle 4 (°)
5
Angle 5 (°)
6
Angle 6 (°)
7
Angle 7 (°)
8
Angle 8 (°)flattened hem
9

Rotate the flashing with the ⟳ handle at the centre of the section, or type the angle.

4. Holes
Or generate a series
Holes · 0

No holes. Click the flat view to place a hole, then set its distances and diameter.

5. Notching

Notching is calculated automatically from the main ribs of the chosen panel (small stiffening ribs are ignored). It is centred on the part with at least 12 mm of material at each end. Available on the first or last segment, excluding hems.

6. Reference and quantity

Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.

MEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISMEPRODISRAL 702412α1 0° (flattened hem)46α2 120°15α3 120°107α4 150°55α5 150°107α6 120°15α7 120°46α8 0° (flattened hem)12Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Edit the drawing directly: drag the round points, or click a dimension or an angle to type the value.Rotate the flashing with the ⟳ handle at the centre of the section, or type the angle.
100 %
Developed width415 mmmax. 1250 mm
Folds8thickness 0,50 mm
Weight / part4.98 kg3,000 mm · 4 kg/m²
Quantity1049.8 kg

Weight basis: 0.50 mm = 4 kg/m² · 0.63 mm = 5 kg/m² · 0.70 mm = 5.6 kg/m² · 1.00 mm = 8 kg/m²

Download :

My flashing library 0

Log in or create an account to save your results. Customer area →

Your saved parts appear here. Click a part to open it.

A production run to launch, a project to price, an annual supply plan?

Describe your needs: models, volumes, thicknesses, colours and lengths. Our team will reply with a priced offer.

Request a quote Contact us